Have any Questions? +01 123 444 555
EN

Agitators

Tower mixers (Turmmix) & PTO agitators

The tower mixer (Turmix) – PTO agitator is used for homogenizing high tanks.

INSTALLATION WITH AN INCREASED WALL DISTANCE RESULTS IN A VERY HIGH THRUST FORCE.

Especially in large tanks, the agitator can be inserted at different positions so that the time required for homogenization can be considerably reduced.

The robust design enables reliable use even in tanks with heavy floating cover formation. Power is transmitted to the agitator blade by means of a drive shaft located in the casing pipe. This is mounted on several bearings and runs in an oil bath.

BASIC EQUIPMENT

  • For tractors over 100hp
  • Sturdy hot-dip galvanized agitator frame drive shaft 35 mm Ø
  • Completely hot-dip galvanized (propeller painted)
  • high – performance agitator blades 500 -700 mm
  • hydraulic cylinder Ø 80 mm
  • cardan shaft from the drive column to the agitator boom
  • For tank heights of: 1.5 m, 5.5 m, 3.0 m, 3.5 m, 4.0 m
  • Lengths: 5 m – 9 m

Submersible mixers

INSTALLATION WITH AN INCREASED WALL DISTANCE RESULTS IN A VERY HIGH THRUST FORCE.

PAULMICHL submersible mixers are preferably used in post digesters (secondary fermentation tanks) and final storage tanks, or for mechanical powerful support. The installation can be done using the standard lowering device for open final storage tanks.

For use in closed tanks, the installation is done by means of a gastight wall or ceiling lead-through.

The PAULMICHL agitator design as well as the ATEX-design range from 0.75kW to 18.5 kW. With an agitator-blade diameter of 181 mm – 780 mm and an increased distance to the wall, a high thrust power is generated. In addition, a reliable use of the PAULMICHL-submersible motor-driven agitator is guaranteed by means of the flow enhancing construction of the motor and the motor support bracket, as well as the high-quality SIC/SIC sealing unit and a drive unit with robust planetary gearing.

Furthermore, thermal monitoring of the agitator is facilitated by an integrated temperature sensor The extensive product range of wall and ceiling leadthroughs facilitates use in fermenters and secondary fermentation tanks. The reliable cable routing of the agitator unit guarantees a long service life and reliable use.

BASIC EQUIPMENT

  • Motor size from 0,75 kW – 18,5 kW

  • Agitator blade diameter 181 – 780 mm

  • Agitator blade design with self-cleaning profiling

  • Drive unit with robust planetary gearing

  • High-quality sealing unit with SIC/SIC mechanical seal

  • IP68 protection class

  • Thermal monitoring of the agitator facilitated by an integrated temperature sensor

  • Special motor cabling with a reinforced cable insulation for double protection against damage

  • Reliable cable routing through cable conduits

  • Robust plastic cable bracket

AGITATORS FOR RING ANS SLALOM CHANNELS

Submersible mixer

Stationary version for ring and slalom channels.

TROUGH THE INSTALLATION WITH AN INCREASED WALL DISTANCE RESULTS IN A VERY GIGH THRUST FORCE.

The submersible mixer can be used for operation in ring an slalom channels by means of a mounting frame of galvanized steel or optionally stainless steel.

The installation can be carried out by means of a fastening slot in the masonry or stainless steel mounting rails. The flow channel is sealed by means of a PVC sealing plate. This means that the height of the agitator can be adjusted at any time.

TECHNICAL DATA

  • Installation in stable mounting frame
  • Standard version galvanized - optional stainless steel
  • Agitator blade as suction and pressure blade
  • Installation in wall slot or with Z-rails
  • High-performance stirring blades for reliable stirring operation
  • PVC sealing plate for height adjustment of the stirring unit
  • Switching devices with time control

RING-CHANNAL-AGITATOR WITH PTO DRIVE

& combination motor / gearbox

The long shaft agitator is installed by means of a guide rail and wall frame.

TROUGH THE INSTALLATION WITH AN INCREASED WALL DISTANCE RESULTS IN A VERY GIGH THRUST FORCE.

This means that the agitator can be inserted at any time and fixed in place by means of wall frame and cable clamp.

Different versions with PTO drive or motor combination as well as suctions and pressure blades are available. The drive power for PTO drives is about 11 -22 kW. For mobile use, there is an three-point hitch.

BASIC EQUIPMENT

  • Construction lengths from 4.00 m – 7.25 m
  • Standard version galvanized – optional stainless steel
  • Agitator blade as suction and pressure blade
  • Stable shaft bearing running in oil bath
  • High-performance agitator blade for reliable agitating operation
  • Optional angular gear for forward and reverse operation
  • Individual special solutions
Settings saved
Privacy settings